Oregon Scientific 3.0 MEGA-PIXEL DIGITAL CAMERA WITH JUMBO DISPLAY PV 100 - Manual (Page 19)

EN
• If ambient light levels are relatively low such as indoors or at
night, you can adjust the brightness levels lower to make the
display easier to see.
TIP: To maximize battery life, keep brightness settings low.
SYSTEM INFORMATION
This option allows you to check the camera model number and current
version of firmware installed.
RECORD MODE MENU OPTIONS
SWITCHING BETWEEN CAMERA AND MOVIE MODE
Use the menu to switch between
Camera and Movie modes. In Movie
Mode, you can record movies at 10
frames per second. The duration of the
movie will depend on the battery life and
memory available.
MENU OK
NOTE In Movie Mode, you can only adjust the white balance, EV and
ISO. In Camera Mode (default setting), all settings will apply.
SIZE
Image size represents picture resolution. The resolution is directly
related to the number of pixels of the camera. As such, 3.0 Mega-pixel
can be arranged as 2048 x 1536 pixels or lower.
NOTE: The higher the resolution size of an image, the larger the
memory space it occupies.
DESCRIPTION ICON TYPE OF
MEDIA
Super Fine Image
(Default setting) Excellent detail and resolution
(2048 x 1536, 3.0 Mega-Pixel).
15
PV100 Eng R7 a OP 9/9/04, 2:45 PM 16