Oregon Scientific 3.0 MEGA-PIXEL DIGITAL CAMERA WITH JUMBO DISPLAY PV 100 - Manual (Page 34)

EN
PROBLEM SYMPTOM CHECK THIS REMEDY
Cannot take
pictures when
the SHUTTER
RELEASE
button is
pressed Taking
Pictures Camera not
turned on Turn on the
camera
No space on
the SD card /
internal
memory Delete unwanted
files or insert a
new SD card
Mode Switch
is set to
Playback
mode Change the
Mode Switch to
Camera or
Movie Mode
Flash does
not go off as
expected Flash is set to
No Flash
Mode Enable flash by
changing it to
another setting
Mode Switch is
set to Playback
or Movie Mode Change the
Mode Switch to
Camera Mode
Flash has not
finished
charging Wait until the
Status Lamp
stops blinking
Image taken
appears too
dark or
blurred Check your
Flash Mode Turn on the
flash by
changing the
Flash Mode
The subject is
too far away Move closer to
the subject
Power turns
off after
turning on Battery level is
too low Replace with
new batteries
Auto Off
Function is
enabled Disable the Auto
Off Function
30
PV100 Eng R7 a OP 9/9/04, 2:45 PM 31