Omega RD200 - Manual (Page 62)

－５８－
11. OTHER PROGRAMMING 11.2 Scale
4
Programming Mode
   
5
Programming Flow Chart
<Example> –100 to +100 for CH 3
Operation screen
[Check]
＋
 
[To be ready for programming]
 
[Selecting channel]
 
[Programming scale]
 
Error message appears?
Temporarily stored
Programming other channels?
＋
Stored
(1) Select the channel to program to
“none” with or .*
(2) Press and
simultaneously to clear and execute
[temporarily storing] and [storing].
*
If a channel is programmed by a
numeric value, not by up and down
keys, and cleared, the channel before
programming change is programmed
to scale “none”.
Note) The scale of the channel, of which
scale was programmed to “none”, is
reflected by the printing range being
programmed in the [Range/Printing
range]. Tag and alarms are cleared
(not programmed).
Press or to check
the programmed scale of other
channels.
• Adding/deleting decimal point
Move the cursor to the right:
or → Numeric keys
• Programming “to”: +
• Space:
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is printed.)
* Fill unused digits with spaces.

Channel
Min. value
(within 5 digits)
to
Max. value
(within 5 digits)
Scale value to
print 0%
+
Scale value to
print 100%
Cur
so
r
C
har
acter
displ
a
y Scale (max. 11 digits by left-justify) Unused digits are filled with spaces
Cursor
YES
NO
Channel
Scale ※
YES
NO
Channel
Ref. 1
Remarks
To clear (none) the scale
programmed
Remarks
Other channels check Reference 1
Various keys
SHIFT
－
(-)
DISP
SHIFT
4
SCALE
SET
END
3
UNIT
ENTRY
SHIFT
SET
END
% /
SHIFT
0
CLEAR
/ %
・
CLOCK
SPACE
COPY(=)
SHIFT
－
(-)
SPACE
COPY(=)
Various
keys
Any key other
than
SHIFT
Reference 2
Storing Reference 3
Ref. 2
Ref. 3