Olympus DS-320 - Manual (Page 32)

32
Formatting
Formatting
If you want to initialize the built-in flash memory to its factory defaults, follow these steps:
1 Press the MENU/VOL switch.
2 Move the MENU/VOL switch up
or down to choose “FORMAT”.
“YES?” will flash.
3 Press the ERASE button for 1 second or longer.
“FORMAT” flashes and then “OK” appears on the display
when formatting is complete.
................................................................................................
To Abort Formatting
In Step 2, press the STOP button while “YES?” is flashing.
The recorder will return to the initial screen before Step 1.
Caution
Formatting will clear the flash memory of all recorded
messages, and reinitialize the clock and other settings.
If you want to initialize the flash memory to its factory defaults,
reset the recorder (P.33) after formatting.
3
2
1
SP DICT
INDEX/
FOLDER
REC
STOP
ERASE
MENU
/VOL