Olympus DS-320 - Manual (Page 39)

39
Installing DSS Player Software
Installing DSS Player Software
In order to use the PC link functions, you must first
install DSS Player and IBM ViaVoice in your PC.
• When running Windows NT4/2000 through
a network connection, it is required to log in
as the Administrator or under a user name
designated as an Administrator.
1 Insert the DSS Player CD-ROM in
the CD-ROM drive.
The Installation program will start
automatically.
• If setup does not take place
automatically, use the following
procedure (the CD- ROM drive name is
assumed to be “D:”):
1 Click the [Start] button and select [Run].
2 Enter “D: ¥setup.exe” in the [Open]
window and click the <OK> button.
2 The language selection screen is
displayed.
DSS Player will be installed for the language
selected here. Select the desired language.
3 A window entitled [“OLYMPUS DSS
PLAYER SETUP”] appears. Be sure
to exit all applications other than
the installation program.
After exiting all applications, click <Next>.
4 Confirm the licensing agreement.
You have to agree with this agreement to
install DSS Player. Click <Yes> if you
agree with it.
5 Selection of the installation
destination directory.
Select the installation destination for DSS
Player. Click <Browse> to change the
current installation destination. If you do
not want to change it, simply click
<Next>.
6 Selection of the program folder.
The program folder name can be
changed here. If you do not want to
change it, simply click <Next>.
7 Confirmation of the start of file
copy.
Check the contents of “Current Settings”.
Click <Next> if you accept them.
• If you want to change the program
folder or installation folder, click <Back>
and change them.
8 File copy.
DSS Player is installed automatically. Be
patient. This may take a few minutes.
9 Completion of setup.
When installation is completed, click
<Finish>.
• If you are asked to restart after
installation is completed, click <Yes> to
reboot the PC.
• As soon as the installation of DSS
Player is completed, the installation of
IBM ViaVoice will automatically start.