Optoma HD82 - Manual (Page 19)

English

User Controls
Image-Shift
Menu Mode
Edge Mask Overscan
16:9
4:3 Letter-Box
Native
HDMl1 HDMl2
S-Video Video YPbPr
DVI
/
Re-Sync
VGA
Screen UP DOWN
Brightness Power Off
Power On
Contrast PureEngine
DB Brite Mode
PURE
Using the Remote Control
Power On
Refer to the “Power On the Projector”
section on page 13.
Brightness Adjust the brightness of the image.
Power Off
Refer to the “Power Off the Projector”
section on page 14.
Contrast
Control the degree of difference between
the lightest and darkest parts of the
picture.
PureEngine The PureEngine is a collection of ad-
vanced image processing technologies
that enhances the quality of the displayed
image.
DynamicBlack
Enable the projector to automatically
optimize the display of dark movie scenes
enabling them to be shown in incredible
detail. (refer to page 26)
/ Brite Mode
Increase the brightness of the image.
(refer to page 34)
Image-Shift
Shift the projected image position verti-
cally.
Enter Confirm your item selection.
Four Directional
Select Keys
Use directional select keys to select items
or make adjustments to your selection.
Menu
Display or exit the on-screen display
menus for projector.
Mode
Select the display mode from Cinema,
Bright, Photo, Reference and User.
Overscan Mask off a few pixels on each edge of the
image to be displayed. Use the function
to adjust if image source happens to have
noise near any edge of the display image.
Power
On Off
MENU
Re-Sync Source
Image Shift
Remote Control