Optoma HD82 - Manual (Page 20)

0
User Controls
Edge Mask Choose “On” to mask off a few pixels on
each edge of the image to be displayed.
Use Edge Mask “On” if image source
happens to have encoding error near any
edge of the displayable image.
Up
Use this button to screen up.
Down
Use this button to screen down.
4:3
Scale the image at a 4:3 aspect ratio.
Letter Box
Enable the viewing of the letterboxed
nonanamorphically enhanced movie at
full screen width. Part of the original im-
age will be lost if the image aspect ratio is
less than 2.35:1..
Re-Sync Automatically synchronize the projector to
the input source.
16:9
Scale the image at a 16:9 aspect ratio.
Native
The input source will be displayed without
scaling.
VGA Press “VGA” to choose source from
VGA1 connector.
HDMI 1 Press “HDMI 1” to choose source from
HDMI 1 connector.
HDMI 2 Press “HDMI 2” to choose source from
HDMI 2 connector.
DVI Press “DVI” to choose Analog and Digital
signal source from DVI connector.
YPbPr Press “YPbPr” to choose Component
Video source.
S-Video Press “S-Video” to choose S-video
source.
Video Press “Video” to choose Composite Video
source.
Source Press “Source” to choose DVI, RGB,
Component, S-Video, Composite Video,
and HDMI source.
Image-Shift
Menu Mode
Edge Mask Overscan
16:9
4:3 Letter-Box
Native
HDMl1 HDMl2
S-Video Video YPbPr
DVI
/
Re-Sync
VGA
Screen UP DOWN
Brightness Power Off
Power On
Contrast PureEngine
DB Brite Mode
PURE
Power
On Off
MENU
Re-Sync Source
Image Shift