Optoma HD82 - Manual (Page 48)


Appendices
Please note that dam-
age resulting from
incorrect installation will
invalidate the warranty.
Ceiling Mount Installation
1. To prevent damage to your projector, please use the
Optoma ceiling mount..
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the pro-
jector met the following specifications:

Screw type: M6

Maximum screw length: 12mm

Minimum screw length: 10mm
Warning:
1. If you buy ceiling
mount from other
company, please
be sure to use the
correct screw size.
Screw size will be
different on different
mounts. It depends
on the plate thick-
ness.
2. Be sure to keep
at least 10cm gap
between the ceiling
and the bottom of the
projector.
3. Avoid installing the
projector near a heat
source.
N
ote
N
ote
220.00mm
(8.66”)
260.00mm
20.00mm
138.50mm
188.10mm
(10.23”)
(0.79”)
(5.45”)
(7.40”)
75.34mm
(2.97”)
370.90mm
(14.60”)
498.57mm
(19.63”)
81.19mm
(3.20”)
97.99mm
(3.86”)
120.00mm
(4.72”)
120.00mm
(4.72”)