Preparing the nebulizer for use – Omron NE-C801 User Manual

Page 11

Advertising
background image

11

WarnIng

• Clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or

optional masks before using them for the first time after purchase.

• If the device has not been used for a long period of time, or if more than one

person uses the same device, clean and disinfect the nebulizer kit, mouthpiece,

and optional nosepiece or optional masks before using them.

CaUTIOn

Make sure the air filter is clean. If the air filter has changed color or has been

used on average for more than 60 days, replace it with a new one.

For directions on cleaning and disinfecting refer to page 18 - 19.
For directions on changing the air filter refer to page 20.

1

Insert the power plug on the AC adapter into

the power connector on the back side of the
compressor. Plug the AC adapter into the electrical
outlet.

WarnIng

Do not plug or unplug the aC adapter into the

electrical outlet with wet hands.

CaUTIOn

• Do not overload power outlets. Plug the AC adapter

into the appropriate voltage outlet.

• Do not use extension cords. Plug the AC adapter

directly into the electrical outlet.

nOTe: AC adapter can be worked at 100 - 240V ~ 350mA, 50/60 Hz.

2

Lift up the mouthpiece and the cap to remove them

from the nebulizer kit.

Electrical Outlet

Power Connector

Power Plug

PREPARING THE NEbULIzER fOR USE

Operating Instructions

NE-C801S-Z_A_M_E_SP_041311.indd 11

4/13/11 10:20:28 AM

Advertising