Optimus Micro-41 - Manual (Page 10)

10
Follow these steps to power the Micro-41
from standard AC power.
1. Set the AC adapter's voltage switch to
3V.
2. Insert the 3.4 mm outer diameter/1.3
mm inner diameter barrel plug into the
AC adapter's cord to read TIP+.
Note: Inserting the barrel plug into the
Micro-41's DC 3V jack disconnects the
internal batteries.
3. Plug the adapter’s other end into a
standard AC outlet.
Using Vehicle Battery Power
You can power the Micro-41 from a vehi-
cle's battery using a DC adapter (not sup-
plied), available at your local RadioShack
store.
RadioSnack
M IC
D C 3 V
14-1169.fm Page 10 Monday, April 26, 1999 4:03 PM