Optimus Micro-41 - Manual (Page 29)

29
CLEANING THE TAPE-
HANDLING PARTS
Dirt, dust or particles of the tape's coating
can accumulate on the tape heads and
other parts that the tape touches. This can
greatly reduce the performance of the Mi-
cro-41. After every 20 hours of tape player
operation, follow these steps to clean the
tape-handling parts or use a RadioShack
microcassette deck cleaning kit.
1. Remove the batteries and disconnect
any other power source.
2. Open the cassette compartment door
and press PLAY to expose the tape-
handling parts.
14-1169.fm Page 29 Monday, April 26, 1999 4:03 PM