Optimus Micro-41 - Manual (Page 25)

25
USING INDEX MARKER
Follow these steps to use INDEX MARKER
to add a special tone to a tape so you can
quickly find that point using the review con-
trols.
1. To mark the beginning of a recorded
section, press and hold down INDEX
MARKER, on the back of the recorder,
for at least 3 seconds during record-
ing. RECORD/BATTERY turns off
while the Micro-41 records an index
marker tone on the tape starting at the
moment you press
INDEX MARKER .
Repeat this step for each desired ref-
erence point.
2. Once you have completed recording,
press PLAY to begin play.
3. Slide REW/REVIEW FAST-F/CUE to
REW/REVIEW to rapidly rewind a tape,
or to FAST-F/CUE to fast-forward a
tape. As the tape moves while rewind-
ing, you hear the tone index markers
you have previously recorded, letting
you stop at starting points or separator
points in your tape.
14-1169.fm Page 25 Monday, April 26, 1999 4:03 PM