Olympus C-3020ZOOM - Manual (Page 18)

18
ENGLISH
6 When is selected in green on
the screen, press
Ññ
to select
the date format.
● Select any one of the following
formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the
procedure used when the date and time
settings are set to Y-M-D.
7 Press
í
to move to the year (Y) setting.
8 Press
Ññ
to set the year. When the year is set, press
í
to move to
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press É
.
screen
9 Press .
● The camera returns to the menu screen.
● If
is pressed again, the menu disappears.
● For more accurate setting, press
at the time of 00 seconds. The clock
starts when you press the button.
● The current settings stay the same even when the power is turned off,
unless they are readjusted.
● The date/time setting will be canceled if the camera is left with no batteries
for approximately 1 hour. If this happens, set the date/time again. If you
remove the batteries a short time after loading them in the camera, it may
take less than 1 hour for the date/time setting to be canceled.
SELECT SET GO
SELECT SET GO SELECT SET GO
GETTING STARTED (Cont.)