Olympus C-3020ZOOM - Manual (Page 39)

ᮢ ᮢ
Confirming the computer recognizes the camera
ᮢ ᮢ
Disconnecting the cable
Windows 98/98SE
ᮢ ᮢ ᮢ
ᮢ ᮢ ᮢ
Transferring images to a computer -Downloading
ᮢ ᮢ
Mac OS 9.0 - 9.1
Windows 2000
Professional/Me
Install the USB driver
as instructed
in the provided
“Software Installation
Guide”.
Connecting USB cable
39
ENGLISH
TRANSFERRING PICTURES TO A COMPUTER
How to connect to a computer by USB cable depends on the Operating
System (OS) your computer is running. Consult the manufacturer of your
computer for details of its operating system
* Even if your computer has a USB connector, data transfer may not function correctly if
you are using one of the operating systems listed below.
● Windows 95/NT 4.0
● Windows 98 upgraded from Windows 95
● Mac OS 8.6 or lower
(except Mac OS 8.6 equipped with USB MASS Storage Support 1.3.5 installed at the
factory)
● A computer that uses a USB connector mounted on an extension card, etc.
● Data transfer is not guaranteed on a generic (non-name brand) PC system.
CAMEDIA Master also allows you to transfer image files stored on the card
and edit them on your computer.
For detailed information about using CAMEDIA Master, refer to its instruction
manual.
Identification of running OS (Windows 98/98SE, Windows 2000 Professional/Me,
Mac OS 9.0 - 9.1)
● When using CAMEDIA Master 2.5, click on “Removable Disk”, not “My
Camera”. Under Mac OS, the driver name is “Untitled”.
Note on using CAMEDIA Master 2.5: