Oregon Scientific RMR613HGA - Manual (Page 12)

EN
11
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
If you use a sensor that collects only
temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
COMFORT ZONE
The Comfort Zone indicates how comfortable the climate
is, based on current temperature and humidity
measurements.
NOTE
ZONE TEMPERATURE HUMIDITY
Any >70%
20 – 25 ° C
(68 - 77
°
F)
40 – 70%
<40% Any
This information is shown in the Humidity Area when
the current measurement is displayed.
RESET SYSTEM
The RESET buttons are located in the battery
compartment for the main unit and sensors. Press
RESET when you change the batteries and whenever
performance is not behaving as expected (for example,
unable to establish radio frequency link with remote
sensor or radio-controlled clock).
When you press RESET, all settings will return
to default value, and you will lose all stored information.
NOTE
Indoor
Display
Designat-
ed
Display Remote
Display
Channel 1
Kinetic-
wave
Icon
Remote
Display
Channel 2
Remote
Display
Channel 3
RMR613HGA lab test R2 1/17/04, 5:00 PM 11