Orion 2000 - Manual (Page 32)

User’ Guide 32
5. Telnet commands
The Cable Router telnet Login and Password:
Login:
Password:
** Note: Cable Modem Router Telnet IP address is 192.168.100.1
Getting Help
Entering a question mark (?) at the system prompt displays a list of commands for each command mode. To
list keywords or arguments, enter a question mark (?) in place of a keyword or argument. Include a space
before the ?. This form of help is called command syntax help, because it reminds you which keywords or
arguments are applicable based on the command, keywords, and arguments you already have entered.
CM>?
debug
Debugging functions
undebug Disable debugging functions
image
Image commands
ping Ping specified IP address
pwd Change password
user-level Change User's access right
show Show commands
nvram NVRAM command
tftp Display/Set TFTP information
dhcp NAT DHCP commands
nat NAT commands
interface Interface commands
ip IP commands
rip RIP commands
web-access Web access control command
access-list
Access list command
pppoe-forwarding PPPoE forwarding command
copy
copy command
cpe-limit Limit CPE number command
write Write configuratoin to nvram
reset Reboot Cable Modem
quit Disconnect