Sylvania HDRV200F - Manual (Page 26)

18
Connections
Connection to a TV (Cont’d)
Connection to a Cable Box or Satellite Box
OUT ANTENNA
IN
OUT
OUT
L
R
D/VCR
RF cable
(supplied)
(Back of this unit)
IN OUT
E
(Back of TV)
Cable TV signal
(Cable box or
Satellite box)
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding–in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
This connection allows you to view or record a scrambled channel. With this connection, channels cannot be changed on
this unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box.
• Read the instruction manual of the cable box or the satellite box also.
After you have completed connections
Turn your TV to the appropriate external input channel (usually near channel 0) in order to view the pictures output
from this unit on the TV. To find the external input channel press the channel button on your TV’s remote repeatedly until
the DVD recorder’s picture appears. External input channels may vary depending on the connection you made. Check
your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV / VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/ VIDEO
INPUT, TV / VCR, 00, 90, 91, 92, 93
TV/ VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV / GAME
00
4380_017-028.qx3 05.11.16 2:26 PM Page 18