Olympus VT1621-01 - Manual (Page 37)

35
2
Record mode (quality setting)
Control panel Monitor Viewfinder
Control panel Monitor Viewfinder
When the Number of Storable Pictures Is
Not Displayed
0 and blinking in the control panel?
The card is full and can no longer store pictures, so do one of the following:
• If a SmartMedia and CompactFlash card are both installed, select the other card. (
➞ 121)
• Delete unneeded images from the full card. ( ➞ 51)
• Switching to a smaller file size. ( ➞ 103)
• Remove the full card and install a new or empty card. ( ➞ 30)
-F- and blinking in the control panel?
The card has not been formatted or the card is damaged, so do one of the following:
• Format the card. Formatting a card erases all images stored on the card. To format the card, on
the arrow pad press and then press the button. After NO PICTURE is displayed, you can
continue taking pictures.
• Replace the card. ( ➞ 30)
• If a SmartMedia and CompactFlash card are both installed, select the other card. ( ➞ 121)
blinking in other situation (not described above)?
Appendix 5: Camera Error Messages ( ➞ 189)