Onkyo DV-SP302 - Manual (Page 16)

16
Making Connections
Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on page 15, connecting to an amplifier
provides you with higher quality dynamic sounds.
To reproduce Dolby Digital surround and DTS surround sound, you need to connect to an amplifier with a Dolby Digital and DTS decoder,
respectively.
About
When connected with an Onkyo amplifier via , your DV-SP302 can be controlled using the remote controller supplied with the
amplifier.
• The function of the upper and lower
connectors are the same. Connect to either one.
• Connecting only the cable does not make the system operational. You must also connect the analog RCA/
phono cables as well.
■ Digital connection
If your amplifier has a digital input jack, be sure to connect it to
either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the
DVD Player.
Note
In the Digital Out setting (page 29), you can select whether the
DV-SP302 will output the PCM signal only, the PCM and other
signals, or no digital signals at all.
■ Analog connection
(necessary for function)
If your amplifier has no digital audio input, or when you use
function, make the analog connection.
Connecting to an Amplifier
(To enjoy the sound advantages of the DVD Player)
To use function:
When you make connection between the DV-SP302 and
Onkyo’s amplifier, be sure to make analog connections as well.
\
COMPONENT
P B
P R
Y
VIDEO OUTPUT
VIDEO
S VIDEO
DIGITAL ANALOG
OPTICAL COAXIAL L
R
REMOTE CONTROL
AUDIO OUTPUT DIGITAL
OPTICAL COAXIAL
AUDIO OUTPUT
OPTICAL COAXIAL
DIGITAL
AUDIO INPUT
Connect one or the other
Amplifier or
Receiver
COMPONENT
P B
P R
Y
VIDEO OUTPUT
VIDEO
S VIDEO
DIGITAL ANALOG
OPTICAL COAXIAL
AUDIO OUTPUT
L
R
REMOTE CONTROL ANALOG
AUDIO OUTPUT
L
R
ANALOG
AUDIO INPUT
L
R
REMOTE
CONTROL
Amplifier or
Receiver