Opticon H-16 - Manual (Page 38)


Chapter . Synchronizing Information

1. On your device screen, tap > Programs > ActiveSync > Menu > Configure Server. If
you have not yet set up sync with Exchange Server, this will say Add Server Source.
. In Server address, enter the name of the server running Exchange Server, and tap Next.
. Enter your user name, password, and domain name, and tap Next.
. If you want the device to save your password so that you will not need to enter it again when
connecting, select the Save password check box.
. Select the check boxes for the types of information items that you want to synchronize with
Exchange Server.
. To change available synchronization settings, select the type of information, and tap Settings.
. To change the rules for resolving synchronization conflicts, tap Advanced.
8. Tap Finish.
4.5 Synchronizing via Bluetooth
Connecting to a PC Using Bluetooth
1. Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your PC to
support ActiveSync.
. Tap > Programs > ActiveSync.
. Tap Menu > Connect via Bluetooth. Ensure that the device and PC are within close range.
You can also use the Sync Setup Wizard to set up the phone to synchronize remotely with the
Exchange Server. This wizard is started when you connect your phone to your PC after installing
ActiveSync on the PC.
. If this is the first time you have connected to this PC via Bluetooth, you must complete
the Bluetooth wizard on the phone and set up a Bluetooth partnership with the PC before
synchronizing.
. Tap Sync.
. When finished, tap Menu > Disconnect Bluetooth.
To preserve battery power, turn off Bluetooth.