Opticon H-16 - Manual (Page 61)

10
Chapter 9. Using Barcode Reader
11
Choosing Barcode Types
Your device is capable of scanning and decoding various
barcode types; to check what kind of barcode is readable and
to assign specific barcode types to scan for, do as follows:
1. Tap > Settings > System tab > Barcode Settings >
Barcodes tab.
. Select specific barcode types or select all of them.
. Tap
.
Advanced Setting
You can set specific configuration to your barcode reader by editing a list of codes in the menu
codes file. The codes you input will be stored in the menu code file and replace default settings.
For descriptions of menu codes, refer to Universal Menu Book (you can download it from www.
opticon.com). Please note that supported menu codes depend on the module type or the firmware
version of your device.
Inputting Menu Codes from a File
You can input menu codes automatically from a file, please do as follow to access the file and
configure the barcode reader.
1. Tap > Settings > System tab > Barcode Settings > Menu codes tab.
. Tap to view available files in your device.
Tap Cancel if you want
to stop the procedure.