Oricom M5500 Series - Manual (Page 27)

25
PHONEBOOK
5
. Press OK key to complete editing the Number and proceed to enter the Name.
The first character flashes on the display.
6
. Press the numeric keys to enter the new Name. As mentioned in Step 4, you can
perform similar editing by pressing ! / or X key when necessary.
7
. Press OK key to confirm the updated Name.
8
. Press key to return to the previous mode.
Note: If you do not perform step 8, the unit will return to the previous mode after
20 seconds.
Review / Edit / Dial stored Phonebook records
With cordless handset
During standby mode,
1
. Press key.
2
. Press  or to browse stored records.
3
. Press key to dial the number.
While you are viewing the record that you wish to edit,
1
. Press and hold key. The display on the
right is shown.
2
. Press key to erase the last character,
or press and hold key to erase the entire characters.
3
. Press key to complete editing the Name and proceed to edit the Number.
4
. Press key to erase the last digit, or press and hold key to erase the
entire digits.
5
. Press key to confirm. Then it goes back to standby mode.
John_