Oricom M5500 Series - Manual (Page 8)

GETTING STARTED
6
Installation and Charger
1
. Connect the mains adaptor to the socket on the back of the base unit and to the
wall mains supply.
2
. Connect the telephone cord to the phone socket on the back of the base unit and
to the wall phone socket.
3
. Insert 2 rechargeable Ni-MH AAA batteries
(included), observing the correct polarity, into the
battery compartment on the handset. Slide the
battery door firmly into place.
4
. Place the handset on the charging cradle and
charge the batteries for a full 15 hours before
using it for the first time.
Note: It may take some time for the cordless handset to power up, and it may get
warm during initial charge. This is normal.
Tip!
It is good practice to put the cordless handset on the charging cradle when it is not in
use to ensure that the handset is always fully charged.
AC110~240V