Sylvania LD427SSX - Manual (Page 42)

42
EN
O
PERATING BLU-RAY
Marker Search Marker Search
This feature allows you to assign a specific point on a disc to be called back later.
BD DVD
To set a marker
1
During playback, press [SEARCH MODE] repeatedly
until “
MKR
“ appears.
e.g.) BD
MKR 1 2 3 4 5 6 7 8 9 AC
2
Use [Cursor s / B] to select an available marker within
30 seconds.
or
MKR 1 2 3 4 5 6 7 8 9 AC
3
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
MKR 2 3 4 5 6 7 8 9 AC
1 0 : 13 : 05
4
Press [BACK] to exit.
To return to the marker later
1
Repeat step
1
in “To set a marker”. Use [Cursor s / B] to
select the desired marker.
e.g.) BD
or
MKR 2 3 4 5 6 7 8 9 AC
1 0 : 13 : 05
2
Press [ENTER] at the desired marker to restart playback
from the specific point which you set.
MKR 2 3 4 5 6 7 8 9 AC
1 0 : 13 : 05
Note:
• Marker search menu will disappear in about 30 seconds
when there is no input.
• You can mark up to 9 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all
markers.
• Selecting “ AC ” at step 3 in the section “To set a marker” will
also erase all markers.
• For BD, marker search cannot be performed when the unit
has kept resume information or the unit is in the stop mode.
Direct Search Direct Search
Using [SKIP H / G]
1
During playback, press [SKIP H / G] repeatedly
until a desired chapter, title or track will be selected.
or
/TR 1 /TR 2 /TR 3 /TR 4
[SKIP H] [SKIP G]
TT 1 TT 2 TT 3 TT 4
[SKIP H] [SKIP G]
2
Playback will start automatically from the chapter, title
or track you selected.
Note:
• [SKIP H / G] are not available when playback is stopped.
Using [the Number buttons]
Press [the Number buttons] to select your desired
chapter, title or track.
Note:
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as described
here.
current chapter/track
(CH)
current title
(TT)
(If the disc has no chapter.)
or
(TR)