Sylvania LD427SSX - Manual (Page 49)

49
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
OPERATING BLU-RAY
BLU-RAY SETTING
TROUBLESHOOTING
INFORMATION
English Español Français
 Blu-ray Audio Setting
Choose the appropriate audio settings for your equipment. It only affects
during the playback of BD/DVD.
3
Follow steps
1
-
2
on page 47, then use [Cursor K / L] to
select “ ”, then press [ENTER].
or
Custom
Language
Video
Audio
Parental
Others
4
Use [Cursor K / L] to select “ ”, then press [ENTER].
or
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
5
Use [Cursor K / L] to select the desired item, then press
[ENTER].
BD Audio Mode (Default: Mix Audio Output)
You can select whether to output the primary and
secondary audio or only the primary audio.
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
Mix Audio
Output At the same time, 7 outputs the primary and
secondary audio if it is available.
HD Audio
Output
Outputs only the primary audio.
Digital Out (Default: Bitstream)
Set to “Bitstream“ when this unit is connected to a
Dolby Digital decoder and DTS decoder.
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
Bitstream
When playing back discs recorded in Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
or DTS-HD, the corresponding core stream
(Dolby Digital or DTS) are output.
LPCM
2ch PCM signal will be output from Digital
Audio Out jack.
Down Sampling (Default: On)
This function is available only on digital outputting of a
disc recorded in 96kHz.
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
On When outputting in 48kHz.
Off When outputting the original sound.
Note:
• When playing back a 96 kHz disc with the copyright
protection or when ‘‘Virtual Surround” is set to “1” or “2”,
the sound will be down sampled at 48 kHz even if the
“Down Sampling” is set to “Off”.
(Refer to “Virtual Surround” on page 46.)
DRC (dynamic range control) (Default: Auto)
This function is available only on the discs which are
recorded in the Dolby Digital format.
or
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
Auto
When the discs that are recorded in the Dolby
TrueHD format is in playback, this unit detects
DRC setting of the disc and set the DRC setting
of this unit to “On” or “Off” automatically.
On
Compress the range between soft and loud
sounds.
Off No effects (original sound).
6
Press [SETUP] to exit.