Oregon Scientific Radio-Controlled Projection Clock with FM Radio RRM310P - Manual (Page 3)

3
EN
LCD DISPLAY
9. RESET: Press to return all values to the default
settings
10. : Switch radio on or off
11. : Toggle through preset radio stations
12.
: Increase or decrease volume
13. FM radio antenna wire
1. Time
2. 24 / 12 hr format
3. Calendar / alarm display
4. Alarm on / off
5. Radio alarm on / off
6. Offset time zone
7. Radio-controlled clock reception
8. Battery status
9. Adapter is disconnected
10. FM radio display / sleep / volume level / radio
frequency
11. Radio station
� �
�
�
�
��
��
�
�
�
�
GETTING STARTED
BATTERIES
Insert batteries (2 x UM-4 / AAA 1.5V batteries) before
first use, matching the polarity (+ and -). Press RESET
after each battery change.
Batteries are low, or there are no batteries installed
and only the adapter is connected.
NOTE
• The batteries are for back-up use only. Please use
the adapter for continuous use.
• It is recommended that you use alkaline batteries
with this product for longer performance.
• Do not use rechargeable batteries with this
product.
ADAPTER
The batteries serve as a back-up power supply. For
continuous use of the projector, install the adapter at
the base of the unit.