Optoma Optoma EP706 - Manual (Page 13)

English 3
Installation
Powering On the Projector
1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will Flash Green.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel. And the Power LED will turn Green.
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,etc.).
The projector will detect your source automatically.
 If you connect multiple sources at the same time, use the
“Source” button on the control panel or remote control to
switch.
Powering On/Off the Projector
 Turn on the projector
first and then the signal
sources.
Power/Standby 2
Lens Cap 1