Optoma Optoma EP706 - Manual (Page 15)

English 
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
Tilt Adjusting
Feet
Elevator Foot
2 3
Elevator Button
The projector is equipped with an elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button  .
2. Raise the image to the desired height angle  , then release
the button to lock the elevator foot into position.
3. Use  to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the eleva-
tor foot into position.
3. Use  to fine-tune the display angle.
3
1