Optoma Optoma EP706 - Manual (Page 37)

English 37
Appendices
 Please note that
damage resulting from
incorrect installation
will invalidate the war-
ranty.
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
met the following specifications:

Screw type: M2.6

Maximum screw length: 10mm

Minimum screw length: 8mm
Warning:
1.> If you buy the ceil-
ing mount from other
company, please ensure
that there is at least
10cm distance between
the bottom cover of
the projector and the
ceiling.
2.> Don’t install the
projector near the
air condition and the
heater, avoid flow-
ing into the projector
directly that caused it
shot down.