Onkyo DR-L50 - Manual (Page 40)

40
Playing the Connected Source
This section shows you how to play the
sources connected to the DVD Receiver.
You may need to see “Connecting to a TV”
on pages 18, 19 and “Connecting to Audio/
Video Equipment” on page 22 while
following the steps in this section.
■ About digital sound
If the equipment is digitally connected to the DVD Receiver,
the sound from the digital input will automatically be selected
and reproduced instead of the analog sound as explained
below.
• When the TV source is selected, the digital sound from the
DIGITAL OPTICAL INPUT jack is reproduced.
When the digital sound is reproduced, the DIGITAL indicator
lights up in the display. According to the received sound
system, the
ŸDIGITAL or DTS indicator lights up.
Note
The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and
PCM sound formats from connected equipment.
Various Functions While Playing the
Connected Source
To use the following functions, see page 42.
• Adjusting the Volume
• Muting the Sound
• Listening Through Headphones
• Controlling the Brightness of the display on the DVD Receiver
Enjoying the Sound Effects While
Playing the Connected Source
See page 48.
Press INPUT SELECTOR 2/3 on
the remote controller or INPUT 2/3
on the unit to select one of the
following input sources:
• TV
• MD/CDR/TAPE
The selected input source appears in the
multipurpose display. Also the input
source indicator is lit in the display until
the DVD Receiver is switched to another
input source.
e.g. When MD is selected.
Start playing the selected source.
■ Changing the “MD” display to match the
connected source
1 Press the INPUT 2/3 button on the unit to select MD.
2 Press the PRESET MEMORY button. “NAME SEL” is displayed
then “MD” flashes in the display.
3 Press the INPUT 2/3 button repeatedly to select the desired
operation.
The display changes as follows:
MD
→CDR→TAPE→MD
4 Press the PRESET MEMORY button to select. “COMPLETE”
appears then the display switches back to the selected input.
1
2
Remote
controller
Unit
ŸDIGITAL DTS
INPUT SELECTOR
Theater-Dimensional
PROGRESSIVE SCAN
IPM
INPUT 2/3
PRESET MEMORY
TV/ SETUP TV/ SETUP
TEST TONE SP SETUP CH SEL
DISTANCE SW MODE UP
TV MUTING
TV
POWER
TV
INPUT
T-D SETUP IPM DOWN
TV VOL +
TV VOL -
9
TV CH - TV CH +
VOLUME
ON
STANDBY INPUT SELECTOR
RECEIVER
COND.M LAST M FUNC.M
ANGLE AUDIO SUBTITLE
T-D/ ST LATE NIGHT
TOP MENU MENU
RETURN DVD SETUP
REPEAT
TUNING TUNER PRESET
MD / CDR / TAPE
A-B STEP/ SLOW
TIMER
CLEAR
PROGRAM
SEARCH
ACOUSTIC
CONTROL
SURROUND
RANDOM
--/---
MODE
SLEEP
MUTING
DIMMER DISPLAY CLOCK
MODE
+10 0 SHIFT
9
4 5 6
7 8
1 2 3
INPUT SELECTOR 2/3