Oce North America OP1030 - Manual (Page 39)

Page 3-5
1
3
2
4
1. Perform the various settings as appropriate.
4 Permit File Overwrite checkbox
Put a check mark in this checkbox if you want to have the corresponding old data overwritten anytime a new fax data
file is received with the same file name. If this box is not selected, a different name will be assigned to the new data file
and that file will be saved with the new name.
3-3 Setup Dialogue Box
1 Hard Disk Warning (%) field
If the volume of data on the hard disk reaches the percentage registered here during saving of received fax data to
disk, a warning message will be displayed.
The desired setting can be entered directly with the keyboard or by clicking on the
▲ and ▼ arrows.
2 Maximum of Received File List field
This setting determines the maximum number of files that will be displayed under the Received File List in the
Scanner File Utility dialogue box. (Available setting: between 10 and 100)
Once the limit designated here is reached, the oldest data will be replaced (overwritten) by any newly received fax
data.
The desired setting can be entered directly with the keyboard or by clicking on the ▲ and ▼ arrows.
3 Reception Notice checkbox
Put a check mark in this checkbox if you want to have a reception notification window appear on your computer monitor
screen anytime new fax data is received. Click on the Open button in the displayed window in order to access the
Scanner File Utility dialogue box, or on the OK button to close the window.
2. To continue making delivery settings, click on the New button and proceed to the following procedure, “3-4 Folder
Setting Dialogue Box”.