Oregon Scientific Travel Radio-Controlled Projection Clock RM888PA - Manual (Page 4)

4
GB
HOW TO USE THE PROJECTION
At night-time the projection makes it easy to read the time and the
alarm on/off status.
1. Slide the [LOCK] slide switch to expose the projection lens.
2. Press [SNOOZE/ ] to turn on the projection for 5 seconds.
The current time in digital format (as shown in the analog clock
display) will be projected onto the surface that the lens is fac-
ing. The alarm-on Indicator [
] will also be projected if the
Alarm is activated.
3. Adjust the projected image using the [FOCUS] knob.
For continuous projection, you can also acquire an optional
universal power adapter from an authorized dealer. When the power
adapter is connected to the unit, the clock projection will be acti-
vated. To keep the clock projection activated press and hold
[SNOOZE/ ] for 2 seconds. To deactivate the feature, press and
hold the snooze button for 2 seconds again or simply remove the
power adapter.
DC 7.5V
DC 7.5V
Note: Remember to leave the projection lens uncovered when the
continuous projection function is being activated.
When you are not using the clock projection feature, slide the
[LOCK] switch close in order to protect the lens and lock the keys.
SECTION 2
THE CALENDAR CLOCK
DEFAULT ANALOG CLOCK DISPLAY
You can select the local time or home time the radio-controlled
time as the default analog clock display by using [SWAP] switch
hidden inside the battery compartment.When the local time is
selected or shown, the icon will be displayed.
DIGITAL DISPLAY MODES
Press [MODE] to display the following in sequence:
• Radio-Controlled Clock Time (same as the default analog clock
display) or Local Time.
• Day of the week
• Calendar (Month: Day or Day: Month format)
• 2nd time-zone (Local or home time)