Oregon Scientific Easy Thermo Projection Clock RM622P - Manual (Page 7)

7
EN
SETTING THE CLOCK MANUALLY
CLOCK MODE
The top line of the clock display shows hours, minutes
and seconds / day. The second line shows calendar/
alarm time and indoor temperature.
To toggle between seconds and day display, press the
MODE button.
CLOCK SETTING MODE
To adjust the clock settings manually without automatic
RF synchronization, remember to disable the Radio
Reception first.
To change calendar, language, time, day of the week
and time settings:
1. Press and hold MODE for 2 seconds to enter setting
mode.
2. Press or to change settings. (To reach the
setting you want quickly, press and hold or ).
3. Press MODE to confirm. (Press the MODE button
again to set day, language, day of the week, hour or
minutes).
NOTE Using the MODE button, the order of the flashing
items is: month, day, language, day of the week, hour,
minutes and then exit clock setting mode.
THE ALARM FUNCTION
BASIC FUNCTIONS
When the alarm goes off, you can turn it off by pressing
the button.
NOTE The alarm will automatically stop ringing after 1
minute. But after 8 minutes, the alarm will sound once
more unless the button is pressed.
DISPLAYING THE ALARM TIME
By default, the unit’s LCD screen displays the current
date and month.
To display the alarm time instead, press the button.
SETTING THE ALARM TIME
To set the alarm time:
1. Press and hold the button for 2 seconds. (The
alarm time “hour” will flash).
2. Use the and buttons to set the hour.
3. Press the button again. (The alarm time “minutes”
will flash).
4. Use the and buttons to set the minutes.
5. Press the button to exit the setting alarm time
mode.
The alarm time should now be displayed.