Oregon Scientific Easy Thermo Projection Clock RM622P - Manual (Page 8)

8
EN
ACTIVATING / DEACTIVATING THE ALARM
To activate the alarm on, press the button. (The alarm
bell icon will appear to the left of the alarm time).
To deactivate the alarm, press the button so the alarm
bell icon disappears.
THE SNOOZE FUNCTION
To use the Snooze function, while the alarm is ringing,
press the SNOOZE / LIGHT button to stop the alarm
sound and activate the Snooze function.
When the Snooze function is enabled, the Snooze
period will last 8 minutes.
NOTE The Snooze function will be disabled if the
button is pressed.
NOTE When the Snooze function is enabled, the Bell
Icon will be flashing.
THE PROJECTOR FUNCTION
The projector displays the time on your ceiling for easy
viewing in a darkened room.
ACTIVATING THE PROJECTOR
To turn on the projector:
Press the SNOOZE / LIGHT button to activate the
projector for 5 seconds.
OR
Slide the PROJECTION switch to ON to activate
continuous projection. However, this function will not
work unless the AC/DC adaptor is used.
If the unit is being run on batteries then the PROJECTION
ON switch does not need to be on. If you hit the SNOOZE
button then the projection will happen anyway.
To deactivate the projection, slide the PROJECTION
ON switch to the “off” position.