Olympus DM-1 - Manual (Page 13)

13
Ejecting SmartMedia cards
1 Set the POWER/LOCK switch to
OFF .
The display disappears.
2 Raise the SmartMedia ejection
switch.
·····································································
Note
The SmartMedia ejection switch will not work if the
POWER/LOCK switch is set to ON.
1
2
POWER
/LOCK
ON
OFF
Inserting and Ejecting SmartMedia cards
Attention
• SmartMedia cards are precision devices. Never
force the cards when inserting them, or subject
them to sharp blows.
• Avoid handling and storing SmartMedia cards
in a hot, damp environment.
• Do not touch the contact area (gold electrodes)
of the SmartMedia card with bare hands.
If a SmartMedia card gets dirty, wipe it with a soft,
dry cloth.
• SmartMedia cards may be vulnerable to
electrostatic data corruption. When carrying a
SmartMedia card, put it in its case.
Remember to back up data from SmartMedia cards
to a PC or other storage medium from time to time
(
→
P.40-41).
• Corrupted, lost, or erased data cannot be
restored.