Olympus DM-1 - Manual (Page 54)

54
Alarm Playback Function
8 Press the PLAY button to
complete the setup process.
The hour indicator flashes.
When you choose OFF, the alarm
playback setup process ends, and the
alarm indicator disappears.
→
Step 13
9 Press the FF/+ or REW/– button
to set the hour.
10 Press the PLAY button to accept
the hour.
The minute indicator flashes.
11 Press the FF/+ or REW/– button
to set the minute.
12 Press the PLAY button to accept
the minute.
13 Press the STOP button to close
the menu.
An alarm tone will sound at the scheduled time. Press any button
while the alarm sounds to play the file you associated with the alarm.
13
8,10,12
9,11
MENU
INDEX/EQ
REC
STOP
ERASE
.....................................................................................................................................................
Notes
• The alarm playback function can be set for only one file at a time.
• The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first turn the alarm settings OFF, then make any desired new
alarm settings.
• The alarm will sound for 5 minutes and then stop.
• If you are using the recorder at the scheduled time, the alarm will sound after you’re done.
• The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the
file associated with the alarm when you press any button.
• The alarm playback setting is cleared if the selected file is erased or the SmartMedia card is ejected.
• The alarm won’t launch at the scheduled time if the POWER/LOCK switch is set to OFF.
Alarm Playback Function