Olympus DM-1 - Manual (Page 57)

57
Hold / Reset
Reset
If the display or the recorder acts strangely,
lightly press the reset button in the battery
compartment with the tip of a ballpoint pen or
a similar object.
Notes
• Do not use a sharp object such as a needle.
• The time/date setup process launches
automatically when you press the reset button. Set
the time and date again (
→
P.14-15).
• Audio data is not erased when the recorder is reset.
Setting the HOLD switch to the
HOLD position.
If you set the DM-1 to HOLD status by sliding
the HOLD switch in the direction of the arrow,
the current conditions will be preserved, and
all buttons and switches except the HOLD
switch will be disabled. This feature is useful
when the recorder has to be carried in a bag
or pocket.
Remember to reset the HOLD switch when
using the recorder.
Notes
• If you set the DM-1 to hold during the Stop mode,
the current time will be displayed. If you press any
button, the time will flash for about 2 seconds, but
the function of the button is disabled.
• The alarm will sound at the scheduled time even if
the recorder is set to hold. The recorder begins to
play the file associated with the alarm when you
press any button.
Hold
MEN
U
INDEX/EQ
REC
STO
P
ERASE
HOLD