Omega Vehicle Security OMEGAFLEX FPU500 - Manual (Page 18)

Setting Up the Pump(s) 3
3-6
3.3.3 Attaching a Single Pump to an Adapter Plate
Refer to Figures 3-8 through 3-11 and Figure C.
Figure 3-8. Mounting the Adapter Plate Figure 3-9. Pump in Closed Position
Figure 3-10. Aligning the Pump Figure 3-11. Securing the Pump to
with the Plate the Plate
STANDARD
MOUNTING
SCREWS
FACE OF
MOTOR
TOP ALIGNMENT
PIN
BOTTOM
ALIGNMENT PIN
ROTOR SHAFT
FLAT HEAD
SCREWDRIVER
ADAPTER
PLATE
MOUNTING
HOLES
VENDOR
MOTOR
MOTOR SHAFT
ALIGNMENT PINS
MOUNTING
HOLES
THREADED
HOLES
TO MOUNT
ADAPTER
PLATE TO
VENDOR
MOTOR (4X)
ALIGNMENT
PINS FOR
PUMP (2X)
CLEARANCE HOLES
FOR VENDOR MOTOR
ALIGNMENT PINS (2X)
ADAPTER PLATE