Olfa 720-0430 - Manual (Page 7)

The screws used to attach the side shelf are already screwed into the left side shelf and side burner
(see the figure below). First remove the screws from the left side shelf and side burner bowl, then attach left
side shelf and side burner to firebox or cart-leg and tighten all the screws as in the figure shown below.
Attention:
a. 4 screws below should be firmed from firebox to left side shelf and side burner.
b. 6 screws to attach firebox should be from outside into firebox.
SIDE BUENER CONTROL PANEL ASSEMBLY
Loosen the three screws and washers from side burner bowl, then attach side burner
with control panel and tighten them as in the figure shown below. Finally attach the
side burner flex wire to the side burner by using a wrench (included).
SIDE SHELF ASSEMBLY
6
Section Two