Omega Speaker Systems Rercorder RD8300 - Manual (Page 35)

Section 4 – Functional Description
Page 26
09/11/2008 REV 0.99
System Admin Menu – Allows the administrator (if security is enabled) to enter the system
administration menu. This allows the recorder to be configured at the base level (passwords,
security etc.)
Details Here
Sound Level Adjust
– Allows the user to adjust the sound level of alarms and prompts. This brings
up a slider bar. Use this to adjust the volume – audible feedback is provided.
Configuration Manager
– Allows the permitted user to import (load), export (save) or clear the
configuration files. Details Here
Quick Save Configuration
– Press this button to do a quick save of the configuration.
Master Channel (Input) Setup
– Allows the administrator to set up and define the input channels.
Details Here
Master Alarm Setup
– Allows the administrator or manager to set up and define the alarms
associated with the channels. Details Here
Digital I/O Setup
– Allows the administrator to set up the digital outputs (relay contacts) and the
digital inputs for the system. Details Here
Send Email
– Allows the user to send an email provided the unit has been configured to do so. Log
in required. Details Here
System Information
– Allows the user to see the status of the recorder – firmware versions, user
logged in, unit tag and IP Address.
Display Builder
– Allows the user to create live displays using widgets. Log in required
Manager/Admin only. Details Here .
Rotate List
– Allows the user to decide which displays appear on the live display when the task bar
is pressed. Log in required. Details Here .
Display Utilities
– Allows the administrator to adjust the display back light and background color.
Admin only. Details Here .
Record Setup
– Allows the user to start and stop recording and set up recording parameters -
media type, channels, file name, record rate and what to record. Log in required.
If the unit is currently recording the menu icon will have the red dot
– pressing the button will allow
the user to stop recording. If the unit is not recording the menu icon will have the green dot –
pressing the button will allow the user to start recording, arm recording or if privileges allow, to set up
the recording. Manager/admin only.
Details Here .
Timer/Totalizer Reset
– Allows the user to reset any timer or totalizer channel back to zero. Details
Here.
Calculator – Allows the user to pop up and use a simple calculator.
User Login
– Allows users to log in to the system. Asks for a user name and password. If a user is
already logged in it will ask if the user wishes to log out. Once logged in a user can operate without
being asked for a password at each step.
Details Here .