Optimus 32-3009 - Manual (Page 5)

5
11 Mono/Stereo Selector — lets
you set the output to stereo or
monaural.
12 Bass/Middle/Treble Controls —
let you adjust the tone of the se-
lected output to get just the right
sound.
13 Cue Assign Controls — lets you
select the channel where the de-
sired audio input source is located
so you can monitor and prepare it
before mixing it in.
14 Cue/Program Control — lets you
balance the volume of the output
playing on the sound system and
the input being prepared for mix-
ing through the headphones.
15 Lamp Jack — lets you connect a
12V DC lamp to light the mixer
controls.
16 Phones Jack — lets you connect
a pair of stereo headphones with
a
1 /
4
-inch plug.
17 Cue Level — lets you adjust the
headphone’s volume level.
18 Stereo Line Outputs — let you
connect the mixer’s output to your
receiver/amplifier and tape deck
so you can play the sounds from
your input sources through your
speaker system, and record them.
19 Stereo Line Inputs — let you
connect most line-level audio
sources such as a CD player, tape
deck, tuner, camcorder, or VCR.
20 Stereo Phono Inputs — for con-
necting low-level audio sources,
such as turntables with a magnet-
ic cartridge.
21 Microphone Input — lets you
connect a low impedance micro-
phone with a
1 /
4
-inch plug instead
of one with an XLR plug.
illustration of mixer back
32-3009.fm Page 5 Tuesday, August 10, 1999 8:31 AM