Oregon Scientific Radio Controlled Projection Alarm EW96 User Manual
Page 4
•
In normal time setting mode, press it to step
the setting items. Press and hold it to exit the
setting mode in any step.
6.- key:
•
In time setting mode, press it to decrease the
setting values.
7.DC jack:
•
Plug DC adaptor to power the clock.
8.ALARM ON/OFF key:
•
Press it once to turn on the backlight and
display the alarm time for 5 seconds.
•
Press it again to turn on/off the alarm.
9.SET ALARM key:
•
Press it once to turn on the backlight for 5
seconds, and at the same time to enter the
alarm time setting mode.
•
In alarm time setting mode, press it to step
the setting items.
10.FOCUS turning knob:
•
Focus the projected image.
11.BATTERY COMPARTMENT:
•
Accommodates 2 AA size batteries.
12.RESET key:
•
Press it to return all values to default values.
•
In case of malfunction, the unit may be required
to reset.
13.°C/°F slide switch:
•
Slide it to switch between Celsius and Fahrenheit.
14.PROJECTION ON/OFF slide switch:
•
Slide it to turn on/off the projector.
15.180° FLIP key:
•
Press it to rotate the projected image by 180°.
16.RCC key:
•
In normal time mode, press it once to receive
the RC signal for reception testing.
•
During the reception period, press and hold it
for 8 seconds to stop the reception.
17.UK/EU slide switch:
•
Slide it to select the country version between
EU (Germany) and UK (England).
18.BATTERY DOOR
LCD DISPLAY
1. Low battery indicator
3
EN