Oregon Scientific Radio Controlled Projection Alarm EW96 - Manual (Page 7)

6
EN
TO SILENCE THE ALARM
1. Press “SNOOZE/LIGHT” to silence the alarm
for 8 minutes. The “
” will be flashing.
2. Press “ALARM ON/OFF” key to turn the alarm
off and activate it again after 24 hours.
3. If no key is pressed within 120 seconds, the
alarm will be turned off and be activated
again after 24 hours.
USING THE PROJECTOR
Slide “PROJECTION ON/OFF” to turn on/off the
projector, and project to a dark background within
1-4 meters so that the time will be shown as below:
Note
1. Slide “PROJECTION ON/OFF” to turn on the
projection function.
2. Press “SNOOZE/LIGHT” to turn on the
projector for 5 seconds.
3. When using DC power adapter, the projector
will be turned on all the time.
4. If alarm is turn on, the alarm icon “ ” will
also be projected.
5. Press “180 FLIP” to rotate the projected image
by 180°.
6. Turn “FOCUS” knob to focus the projected
image.
BATTERY REPLACEMENT
If the low battery indicator “ ” displays beside the
time, it indicates that battery power of main unit is
not enough and you should replace with 2 new AA
size batteries at once.
Low battery indicator