Olympus C-2020ZOOM User Manual
Page 107
107
When the buffer memory is
full, the upper block will light
and no other operation can be
performed until the upper
block goes off.
4
Note:
• Some noise may appear compared to a still picture.
• Do not push the LCD monitor forcibly.
• Pictures that appear on the LCD monitor are for composition purposes
only.
• It is recommended to use the optical viewfinder for less camera
movement and battery consumption.
• It will take longer to record when the LCD monitor is used.
• When the subject is viewed diagonally in the camera, the edges may
appear zigzagged on the LCD monitor. This is not a malfunction; it will be
less noticeable in Display mode.
• A strip of light may appear on the top/bottom of the LCD monitor, but this
is not a malfunction.
• When a picture is taken in a lighted area, such as in sunlight, vertical
lines may appear on the LCD monitor. This is not a malfunction.
• Printed images will be slightly cropped compared with what you see on
the LCD monitor.
F2.0 1/800 +2.0