Olympus C-3000ZOOM - Manual (Page 63)

63
EXPOSURE COMPENSATION
In addition to automatic exposure, you can also adjust it manually by +/–
2 (approx. 1/3 steps). Adjust + to increase the exposure, and – to
decrease the exposure. Confirm the settings by turning on the LCD
monitor.
Set the Mode dial to P or A/S/M.
• For A/S/M, the Shutter priority
mode or Aperture priority
mode must be selected. (p.
107)
When P is selected, press the
LCD monitor ON/OFF button
to turn on the LCD monitor.
• With A/S/M, the LCD monitor
will turn on automatically.
• The exposure setting will be
displayed.
Press the right arrow on the
Jog dial for + adjustment and
the left arrow for – adjustment.
• When set to a value other than
0, is displayed on the
control panel.
3
2
1
PO
W
E
R
/ M
O
D
E
D
I AL
P
A/S
/M
OF
F
P F2.8 1/800 +2.0
Exposure compensation
Note:
• Not available in the Manual mode.
• Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off. (p. 194)
• Although the brightness of the LCD monitor can be changed with the
exposure compensation, it may not appear to change when the subject is
mostly dark. In such a case, display the recorded picture on the LCD
monitor to check its brightness.
• The exposure compensation may not work properly when shooting with
the flash.
3 1
2