Olympus C-3000ZOOM - Manual (Page 68)

68
The Spot metering mode is used to obtain the right exposure regardless
of the backlight. Place the subject in the center of the autofocus marks.
Set the Mode dial to P or A/S/M.
Press the Spot/Macro button
until
appears on the
control panel.
• To cancel the Spot metering
mode, press the Spot/Macro
button several times until
disappears.
Take a picture.
3
2
1
Digital ESP metering/Autofocus
Spot metering mode
Macro mode (p. 69)
Macro mode + Spot metering mode (p. 70)
SPOT METERING MODE
PO
W
E
R
/ M
O
D
E
D
I AL
P
A/S
/M
OF
F
Control panel
Note:
• Unless OFF is selected in All Reset, the setting will be canceled when
the power is turned off. (p. 194)
2
1
3
You can select the following modes with each press of the
Spot/Macro button.
➠
➠
➠
➠