N* (22), On* (22) – Sony SLV-SE230D User Manual

Page 22

Advertising
background image

22

Setting up the VCR with the Auto Set Up function

To cancel the Auto Set Up function

Press MENU.

To change the RF channel

If the picture does not appear clearly on the TV, change the RF channel on
the VCR and TV. Select INSTALLATION from the menu, then press

M/m

to highlight VCR OUTPUT CH and press

,. Select the RF channel by

pressing the

M/m buttons. Then, tune the TV to the new RF channel so that

a clear picture appears.

Tip

• If you want to change the language for the on-screen display from the one preset in

the Auto Set Up function, see page 26.

Notes

• Whenever you operate the Auto Set Up function, some of the settings

(ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.

• Auto preset starts automatically only when you plug in the mains lead for the first

time after you purchase the VCR.

• After using the Auto Set Up function, the language abbreviations do not appear

automatically when you connect the mains lead again. If you want to use the Auto
Set Up function again, press MENU, then press

M/m/</, to highlight

INSTALLATION and press OK. Press

M/m to highlight AUTO SET UP, then

repeat all procedures from step 4.

• Auto preset can be performed by pressing x (stop) on the VCR continuously for 5

seconds or more with no tape inserted.

* not available on SLV-SE630D/E

Advertising