Sony SLV-SE230D - Manual (Page 66)

66 Adjusting the picture
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
1 During playback, press MENU, then press M/m/</, to highlight
USER SET and press OK.
2 Press M/m to highlight SMART
TRILOGIC, then press ,.
3 Press M/m to set SMART TRILOGIC to
ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press
<.
To sharpen the picture, press ,.
4 Press MENU to return to the original screen.
T R A C K I N G – – – – – – – – – – – –
Tracking meter
S E T
M E N U :
:
O K : E N D
S E L E C T
O S D :
T A P E S E L E C T
O N
:
O F F :
C O L O U R S Y S T E M
E
: 9
1 8
1 6
0
:
F O R M A T A U T O
A U T O
:
N I C A M
P O W E R S A V E
O N : S M A R T T R I L O G I C
O N :
:
E X I T
S E T
M E N U :
:
O K :
S O F T E N
S M A R T T R I L O G I C : O F F
S H A R P E N
– – – – – – – – – – – – – – – – – – – – –
P I C T U R E
E N D E X I T
O N / O F F :