Oki B 2400 - Manual (Page 30)

2-12 Service Manual
24xx
Irrecoverable Operator Errors
Paper Out and Font lights blink. If this indication occurs, the
problem may be with the paper present sensor or the paper select
sensor. Check the following in the order listed and if the printer does
not work correctly, go to the indicated service check.
Paper Present Sensor
Paper Select Sensor
Action Check
Remove all paper
from the printer.
Turn the power on.
Paper Out blinks when paper does not exist.
Paper Out turns off when paper exists.
Go to “Paper Present Sensor Service Check”
on page 2-22 .
Action Check
Turn the power off.
Install the Push
Tractor.
Set the paper select
lever to the tractor
position and load
continuous forms.
Turn the power on.
Load/Unload function correctly.
Go to “Paper Select Sensor Service Check” on
page 2-25 .
Remove the
continuous forms.
Set the paper select
lever to the cut sheet
position and insert a
cut sheet.
When Auto Ready Cut Sheet is enabled, paper
feeds automatically.
When Auto Ready Cut Sheet is disabled, press
FormFeed to load a cut sheet.
Verify Load/Unload does not function.
Go to “Paper Select Sensor Service Check” on
page 2-25 .