Sylvania HT6051FB - Manual (Page 16)

– 16 – EN
Functions
1 1
1 1
Special Settings
Each time you press [AUDIO], audio
language changes as example below.
This player allows you to select a subti-
tle language (if available) during DVD
playback.
DVD-V DVD-V
1.ENG/6
ENG
FRE
OFF
(English subtitles)
(French subtitles)
(no subtitles)
Each time you press [SUBTITLE],
subtitle language changes as example
below.
Subtitle Language
SUB TITLE
...
To set subtitle ON/OFF
1.ENG/6
2 2
OFF
Hint Hint
• If your language is not shown after press-
ing [AUDIO] or [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow audio language
or subtitle language setting on the disc
menu. (Operation varies depending on the
disc, so refer to the manual along with the
disc.)
• When “NOT AVAILABLE” appears on the
TV screen, it means no subtitle is recorded
on the scene.
• If you choose a language that has a three-
letter-language code, the code will be dis-
played every time you change the subtitle
language setting. If you choose any other
languages, ‘---’ will be displayed instead.
(Refer to page 24.)
• Some discs will only allow you to change
the subtitle from the disc menu. Refer to the
manual accompanying the discs for details.
PLAY
PLAY
SUB TITLE
Dolby Pro Logic II
Dolby Pro Logic II creates five full-band-
width output channels from two-channel
sources. This is done using an advanced,
high-purity matrix surround decoder that
extracts the spatial properties of the orig-
inal recording without adding any new
sounds or tonal colorations.
WMA WMA WMA MP3 MP3 MP3
CD CD CD DVD-V DVD-V
1 1
OFF
2 2
ON
ON: Effects.
OFF:No effects (original sound).
3 3
MODE
Press three times.
(once for CD and MP3/WMA)
Hint Hint
• Dolby Pro Logic II is effective for only the 2
channel stereo system running.
• On CDs, Dolby Pro Logic II will not be
effective if the sound mode is set to some-
thing other than STEREO. Refer to “Stereo
Sound Mode”.
• This function cannot be used during Rapid
play.
RETURN
ENTER ENTER ENTER
PLAY
STEREO
L-ch
R-ch
(right and left channels
are active)
(left channel is active)
(right channel is active)
This player allows you to select a
sound mode during CD playback.
CD CD CD
1 1
STEREO
Each time you press [AUDIO], sound
mode changes as example below.
Stereo Sound Mode
PLAY
AUDIO
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
...
Hint Hint
• Some discs will only allow you to change the
audio setting from the disc menu. Refer to the
manual accompanying the discs for details.
• Audio language selection cannot be made
during Rapid play.
1 1
Camera Angles
Some DVD discs may con-
tain scenes which have been
shot simultaneously from var-
ious angles. You can change the cam-
era angle if the (
) icon appears on
the screen. If the “ANGLE ICON” set-
ting is “OFF” in the OTHERS menu, the
(
) icon will not appear. (Refer to
pages 17-20.)
DVD-V DVD-V
1 1
1 / 8
ANGLE
ON
Black Level Setting
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
DVD-V DVD-V
PLAY
PLAY
MODE
Press twice.
Audio Language
This player allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
DVD-V DVD-V
1 1
1.ENG Dolby D 3/2.1ch 48k/3
AUDIO
PLAY
2 2
OFF
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3 3
RETURN
ENTER ENTER ENTER
Hint Hint
• Dolby Pro Logic II cannot be changed when the
sound mode is set to either L-ch. or R-ch.
E61TAUD_ENSP.qx33 05.8.9 10:51 AM Page 16